|Info:||Add review||List of articles|
Unihoc EVO3 HOOK Floorball Blade
Trix blade for those who like zorro or pull the ball with the blade
Unihoc Evo3 Hook is a trix blade for those who like to do tricks with the ball. Also works well for those who like a ball pit at the blade tip to use as a bucket.
EVO3 Hook is a variant of the regular Evo3 blade. EVO3 is a blade where you yourself can hook the blade tip to a ball pit. But why do it, when you can buy already done as a Evo3 Hook blade. (The only downside is Evo3 Hook is not approved for game play because of its big ball pit.)
Unhoc Evo3 Hook is basically, until the last crossbar in the blade tip, the same blade as EVO3. An assymetric ball groove from the heel to the tip with a light underhook that gives speed and a little height to the ball. The back hand side is smooth and nice until the last rib, and therefore works well for backhand play.
The heel is reinforced by the neck continuing as an extension down towards the lower blade rim. It gives a stiff heel, where the force from the shaft goes down into the blade and helps you with a harder shot.
But it's the tip thats everything! Here all similarities with Evo3 end. What you recognize is the swoosh with extra filling. But here the fill is already used to stabilize a grotesque ball pit. Evo3 Hook gets a big bump on the back hand side thanks to the pit. But here's the purpose of the blade to be able to use it in a creative and fun way, not to get a nice backhand with the tip of the blade.
Unihocs logo imprinted in the blade neck extension.
The EVO3 blade is not approved for organized match games according to IFF rules. If you heat EVO3 Hook to make your own hooking, there is a risk that the pre-made zorro pit will loose it's shape.
|Blade:||Unihoc EVO3 Hook|
|Blade Neck inner diameter:||18 mm|
|IFF Approved:||Not approved|
|No. of screws:||2|
|Screw mounting:||Forehand and backhand|